Tapastring Home Page

Guitar Care Products

the "Vintage Jack"

the "Vintage Jack" for Mandolin

Cables for "Vintage Jack" Systems

Vintage Pickup Systems

Guitar Straps

Guitar Strings

Contact Us

Customer Service

Authorized Dealers

Jaquie Gipson Acoustic Fingerstyle and Tap Guitar

The "StrapKeeper"

How often has your guitar strap failed to hold properly on the "strap jack" endpin of your favorite instrument and you thought "There just has to be a better way".    Now there really is a better way!!  The photo shows a steel body (can you say heavy?) resonator guitar equipped with a standard strap jack suspended by only the strap jack end of the strap.  This is a standard strap and a standard endpin type strap jack.  No alterations of any kind are required.  Simply slide the leather "Strap Keeper" through the hole in your strap.  Fold the "Strap Keeper" and slip the loops over the endpin strap jack.  Finally, push the non-marring nylon retainer into the groove around the end pin jack until it "clicks".   The "Strap Keeper" provides the solid connection between your guitar and strap that you have been longing for.  "Strap Keepers" are easily installed and readily removed.  They fit all standard endpin type strap jacks and guitar straps.  The "Strap Keeper" will not interfere with the use of standard cables or endpin type preamps.

Use our Secure Shopping Cart and Order Yours Today.

 

the "Strap Keeper"	$9.99 post paid
tgc0505

 

Installation Instructions

 

Slide the leather "Strap Keeper" through the hole in your strap. Fold the "Strap Keeper" and slip the loops over the endpin strap jack. Push the non-marring nylon retainer into the groove around the end pin jack until it "clicks". Finally rotate the nylon retainer so that the opening is away from the guitar strap. Remove the nylon retainer by pulling on its keeper cord. If the retainer is especially sung on your strap jack, push on the open ends of the retainer while pulling the cord.

 

                     

click on the photos to view larger image.